ZX1 Promotional Video

Woodies Home and Garden Services

ZX1 Testimonial

I have been using friction modifiers in my cars since the 1980’s when I discovered some of the Teflon based products. I later had access to the lead/zinc based products (quite good in the grease range) and at one time I used a ceramic based product which is now off the market.

I was introduced to ZX1 a couple of years ago and since I had lost contact with my previous supplier of auto products I was quite keen to try it on my classic Falcon.

I run a 302w, C4 combination on LPG. The engine was rebuilt 10 years ago. I have had many issues with high running temperatures and have tried a couple of friction modifiers in the hope of dropping heat levels in the engine.

The second issue is a noisy hydraulic lifter- the lifters are often rattly at low revs in the V8 so anything that reduces possible wear will mean I delay replacement!

Well it is now 12 months since I did the first treatment with the ZX1, I treated the whole range of components – radiator thru to brakes.

The biggest improvement I have noticed is that the engine is generally a lot quieter at running temperature and cruising speeds. The running temperature is a lot more consistent – there is less variation in engine tempt and it has less peaking when in stop-start traffic. The differential has improved in it’s noise levels and I can only put this down to the action of the ZX1.

The other major improvement has been fuel consumption – enough improvement to notice it!

I also run a landscaping business and have now treated all my engines. Lawnmower, edger, whipper snipper, chainsaw (electric and 2-stroke). After running in my new mower I treated it with ZX1 and left it running for 15minutes – I actually had to cut back the engine because the rev gain as the ZX bedded in was very noticeable!

The engine is a lot smoother now and I hope to get a longer life out of this mower!

I highly recommend the addition of ZX1 to any engine you have especially if you have invested in a new one! The long-term savings in maintenance and replacement will pay back the investment!

John Wood

Woodies Home and Garden Services

Perth

Shelby Cobra 62

----- Original Message -----
From: Ron …….
To: ZX1 ; ZX1 Aust
Sent: Saturday, March 27, 2010 5:08 AM
Subject: Shelby Cobra 62 oil


Hello John,


It has been a few months since I started using your ZX1 oil product in my Shelby Cobra 62 and I wanted to provide feedback. As you know, I enter the Cobra in a number of "spirited demonstrations" around our State where It has beaten all classes over the 4 litre capacity. Since using ZX1 we have seen a demonstrated lift in power output and more noticeable, the engine has always leaked a small amount of oil, even with the previous lumpy engine, which has now stopped and I have not had to add any oil since using your product.

ZX1 has exceeded my expectations and I will now use it in all my vehicles and recommend to my car enthusiasts friends.


Thanks and all the best
Ron …..
WA Cobra Car Club